WEW-C Series Computer Display Hydraulic Universal Tester

2018-05-22 14:41admin

WEW-C Series Computer Display Hydraulic Universal Tester

WEW-C series computer display hydraulic universal testing machine is high-performance, high configuration machine, especially suitable for testing agencies, research institutes, colleges, military industries and other units to detect and analyze material properties, also suitable for steel metallurgy enterprises to conduct large quantities of tests.

WEW-C series computer display hydraulic universal testing machine is mainly used for tensile, compression, bending, cutting and other room temperature tests of metal materials. Equipped with high temperature stove and cryogenic box, it can also be used to conduct high and low temperature tests. In addition, it can be used to test timber, concrete, cement, rubber and other non-mental materials.

Features:

1. Advanced high-rigidity host machine with reasonable structure and high reliability.

2. The anti-backlash structure can completely avoid the influences of screw clearance.

3. Disk type machine drives turbine, getting the nut moving up and down along the fixed lead screw, regulating testing space, driving steadily and reliably, the lead screw not spinning, accurate positioning, fully ensuring the geometric accuracy of the complete machine.

4. There is a sheathing board between the jaw cardboard and jaw seat, effectively protecting the jaw seat from wearing damage.

5. Oil cylinder down setting, double testing space, low testing position, convenient to replace the accessories and specimens.

6. Oil cylinder uses clearance-sealing method, special hydrostatic back-up oil film friction-free guidance technology.

7. Table type oil sources, practical and nice. The oil source configures imported NACH internal high-pressure gear pump, controlling precisely.

8. Independent low noise gripping oil source ensures that the specimens are gripped steadily, not coming off even if they are broken.

9. Control modes can be combined freely and switched smoothly, fully comply with the GB/T 228-2002 standards.

10. The control system has NetWare interface, and it is convenient to connect the internet in laboratories and transmit the testing results through the internet.

Technical parameters:

Specifications	WEW-300C	WEW-600C	WEW-1000C
Maximum testing force (kN)	300	600	1000
Force measuring range	2%～100%Fs
Force accuracy	±1%
Limit of deformation measuring error	±1
Displacement measurement (mm)	optical-electricity encoder, resolution 0.01
Piston stroke (mm)	255	255	255
Stretching space (mm)	600	600	600
Compression space (mm)	500	500	500
Testing space adjusting mechanism	Disk type machine, turbine worm driving
Column distance (mm)	490	520	620
safety protection device	Software protection and mechanical limitation protection
Over-load protection	2%～5%
Maximum width of flat specimen (mm)	70	76	70
Thickness of flat specimen (mm)	0～15mm	0～30mm	0～40mm
Diameter of round specimen (mm)	Φ10～32	Φ13～40	Φ13～60
Dimension of the upper and bottom pressure plate (mm)	Φ120	Φ160	Φ200
Maximum spacing between bending pivots (mm)	400	500	500
Width of bending pivots (mm)	140	140	140
Power	380V 50Hz three-phase four-wire
Host dimension	9406302010	9706302100	11707502300
Entire machine quality (kg)	2500	3000	4000

为您推荐

Electronic universal Tester Hydraulic Universal Tester Impact Testing Machine Tensile Testing Machine Friction-wear Testing Machine Cupping testing machine Spring Testing Machine Wood-based Panel Tester Pressure Testing Machine Torsion Testing Machine Bending Testing Machine Plate-making Machine End-quenching Testing Machine Large Component Tester Magnetic Clutch Tester Hardness Tester Metallographic Tester Spectrometer

WEW-C Series Computer Display Hydraulic Universal Tester

About Us

News

Product

Case

Contact us